Skyrmion transport driven by pure voltage generated strain gradient

The magnetic skyrmion transport driven by pure voltage-induced strain gradient is proposed and studied via micromagnetic simulation. Through combining the skyrmion with multiferroic heterojunction, a voltage-induced uniaxial strain gradient is adjusted to move skyrmions. In the system, a pair of short-circuited trapezoidal top electrodes can generate the symmetric strain. Due to the symmetry of strain, the magnetic skyrmion can be driven with a linear motion in the middle of the nanostrip without deviation. We calculate the strain distribution generated by the trapezoidal top electrodes pair, and further investigate the influence of the strain intensity as well as the strain gradient on the skyrmion velocity. Our findings provide a stable and low-energy regulation method for skyrmion transport.     

Effect of additive length and chemistry on the morphology of blends of conjugated thiophenes and fullerene derivative acceptor molecules

Small molecule additives have been shown to increase the device efficiency of conjugated polymer (donor) and fullerene derivative (acceptor) based organic solar cells by modifying the morphology of the device active layer. In this paper we conduct a systematic study of how additives affect the donor‐acceptor morphology using molecular dynamics simulations of blends of thiophene‐based oligomers, mimicking poly(3‐dodecylthiophene) (P3DDT) or poly(2,2′:5′,2”‐3,3”‐didocyl‐terthiophene) (PTTT), and fullerene derivatives with additives of varying length and chemical functionalization, mimicking experimentally used additives like methyl ester additives, diiodooctane, and alkanedithiols. We find that functionalization of additives with end groups that are attracted to acceptor molecules are necessary to induce increased donor‐acceptor macrophase separation. In blends where acceptors intercalate between oligomer alkyl side chains, functionalized additives decrease acceptor intercalation. Functionalized additives with shorter alkyl segments increase acceptor macrophase separation more than additives with same chemical functionalization but longer alkyl segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1046–1057     

单层n型MoS2/p型c-Si异质结太阳电池数值模拟

单层二硫化钼(MoS₂)是一种具有优异光电性能的半导体材料,在太阳能能量转换中表现出很大的应用潜力。本文基于AMPS模拟软件,对单层n型MoS₂/p型c-Si异质结太阳电池进行了数值模拟与分析。通过模拟优化,n型MoS₂的电子亲和能为3.75 eV、掺杂浓度为10¹⁸ cm^-3,p型c-Si的掺杂浓度为10¹⁷ cm^-3时,太阳电池能够取得最高22.1%的转换效率。最后模拟了n型MoS₂/p型c-Si异质结界面处的界面态对太阳电池性能的影响,发现界面态密度超过10¹¹ cm^-2·eV^-1时会严重影响太阳电池的光伏性能。     

Every planar graph without 4-cycles adjacent to two triangles is DP-4-colorable

Wang and Lih (2002) conjectured that every planar graph without adjacent triangles is 4-choosable. In this paper, we prove that every planar graph without any 4-cycle adjacent to two triangles is DP-4-colorable, which improves the results of Lam et al. (1999), Cheng et al. (2016) and Kim and Yu [ arXiv:1709.09809v1].     

AGE method simulations of a turbulent far‐wake compared to spectral DNS

Turbulent flow simulation methods based on finite differences are attractive for their simplicity, flexibility and efficiency, but not always for accuracy or stability. This paper demonstrates that a good compromise is possible with the advected grid explicit (AGE) method. Starting from the same initial field as a previous spectral DNS, AGE method simulations of a planar turbulent wake were carried out as DNS, and then at three levels of reduced resolution. The latter cases were in a sense large‐eddy simulations (LES), although no specific sub‐grid‐scale model was used. Results for the two DNS methods, including variances and power spectra, were very similar, but the AGE simulation required much less computational effort. Small‐scale information was lost in the reduced resolution runs, but large‐scale mean and instantaneous properties were reproduced quite well, with further large reductions in computational effort. Quality of results becomes more sensitive to the value chosen for one of the AGE method parameters as resolution is reduced, from which it is inferred that the numerical stability procedure controlled by the parameter is acting in part as a sub‐grid‐scale model. Copyright © 2002 John Wiley & Sons, Ltd.     

锥形透镜光纤聚焦特性研究

锥形透镜光纤(TLF)是实现光纤与平面光波光路(PLC)芯片高效耦合的核心元件。了解和掌握其聚焦特性是指导平面光波光路尾纤封装技术的关键。给出了表征锥形透镜光纤聚焦特性的两个参量出射光斑直径和远场发散角的理论分析模型,其误差小于1.14%;采用光束传播法数值模拟了锥形透镜光纤中的光波传输和模斑的演化,确定了锥形透镜光纤端面出射光斑的大小;优化锥形透镜光纤结构参量为:拉锥长度300μm,锥角0.733°,透镜曲率半径13.485μm;建立了基于数字摄像机的锥形透镜光纤出射光场测试系统,提出了物理光学反向推演法,计算出锥形透镜光纤聚焦光斑尺寸和远场发散角。理论与实验结果有着良好的一致:对于相同结构参量的锥形透镜光纤,实验反推法得到的出射光斑尺寸与理论值相比误差为3.15%,远场发散角误差为3.67%。     

ZnSe及ZnSe/GaAs异质结构中压力导致的直接禁带向间接禁带的转变

用经验赝势方法计算了体ZnSe以及ZnSe/GaAs单异质结系统中ZnSe外延层г、X、L等特殊对称点导带底能量随压力的变化。结果表明，同Si、Ge、GaAs等半导体材料不同，ZnSe的X点导带底具有正的压力系数，但比г点的压力系数小，这是ZnSe材料以及ZnSe基异质结构材料发生直接禁带向间接禁带的转变时所需转变压力较大的根本原因。研究了ZnSe/GaAs异质结构中晶格失配造成的应变对外延层г、X、L对称点压力系数的影响，表明这种晶格失配造成的应变可以极大地减小ZnSe外延层材料由直接禁带向间接禁带的转变压力。     

推广的奇轮的圆色数

图G的圆色数(又称"星色数")xc(G)是Vince在1988年提出的,它是图的色数 的自然推广.本文由奇轮出发构造了一族平面图,并证明了此类图的圆色数恰恰介于2和 3之间,填补了该领域的空白.     

Reduction of Entrained Hydroxy Species in Ormosil Films for Integrated Optics

Organically modified silicates (ormosils) have been viewed as possible materials for optical signal processing devices for communications networks. One significant problem obstructing their use in this application is the absorption of infrared light by hydroxy species (present for example in silanol groups (SiOH) and water) around the communications wavelengths (1310 and 1550 nm). We have investigated several ormosil compositions, synthesised via an aqueous sol-gel method, to determine if residual hydroxy groups can be removed more effectively via reducing the connectivity of the material by increasing the number of organic groups (such as Si—CH₃). Furthermore, we have investigated the effect of different inert atmospheres on the drying process. It was found that reducing the connectivity does promote the removal of hydroxy absorption, mainly via the condensation of residual silanol groups, but also by removal of residual water, depending on the other precursors in the system. It was also found that the drying atmosphere used (nitrogen or helium) had no effect on the drying process.